The transparent one-phase gel from PNB is the ideal solution for professional studio use. Thanks to its medium-viscosity, self-leveling texture, the gel is easy to apply and perfectly sculpt. It adheres reliably, does not chip, does not yellow, and is ideal for various techniques such as modeling, design sealing, and aquarium design.

Can be used both as a sculpting gel and as a base for color or camouflage gels.

Advantages of PNB UV/LED One-Phase Gel

• Crystal clear transparency without yellowing or peeling

• Self-leveling consistency – ideal for beginners & professionals

• Medium viscosity – easily moldable, optimally controllable

• Versatile: modeling, design sealing, aquarium design

• No yellowing, no layering

• UV and LED compatible

Application Instructions

1. Prepare the nail: Degrease the nail plate with Nail Prep, push back cuticles, buff with a 180/240 grit file. Remove dust, apply Nail Dehydrator.

2. Apply primer: Depending on the nail type, use Acid Primer (for moist nails) or Bond Control (for normal nails). Apply Acid Primer very sparingly and only to the plate.

3. Adhesion layer: Optionally, massage in a thin layer of UV/LED Builder Gel Crystal Clear or Pink as an adhesion base and polymerize for 30–60 seconds.

4. Modeling: Place forms, sculpt a thin base layer in the desired length and shape with the gel. For a strong C-curve, optionally shape for 7–12 seconds, then cure completely for 60 seconds.

5. Finish: Remove inhibition layer with Gel Cleanser, file into shape with a 180/240 grit file. Then seal with a UV/LED Top Coat and cure again for 60 seconds.

Curing Time

• UV lamp: 2 minutes

• LED lamp: 60 seconds